How can we help?

You can also find more resources in our Help Center.

Study sets matching "ccna exam chapter 7"

Study sets
Classes
Users

Study sets matching "ccna exam chapter 7"

125 terms
CCNA Chapter 7
The ________________ is responsible fo…
The ___________ layer provides for the…
In _________, these segmentation and r…
The ___________ layer uses ports to id…
Transport Layer
Transport
TCP/IP
Transport Layer
The ________________ is responsible fo…
Transport Layer
The ___________ layer provides for the…
Transport
9 terms
CCNA - Chapter 7
Boot ROM
Configuration Register
Flash
Ping
Used in routers to put the router into bootstrap mode. Bootst…
A 16-bit configurable value stored in hardware or software th…
Electronically Erasable Programmable Read-Only Memory (EEPROM…
packet Internet groper: A Unix-based Internet diagnostic tool…
Boot ROM
Used in routers to put the router into bootstrap mode. Bootst…
Configuration Register
A 16-bit configurable value stored in hardware or software th…
50 terms
CCNA 2 Chapter 7
Which algorithm is used by the OSPF ro…
The acronym for the link-state routing…
What are the 4 main components of dyna…
What is the primary benefit of using d…
Dijkstra's algorithm
OSPFv3
1. data structures - routing tables... 2. messages (incoming & o…
routers exchange routing information when the topology change…
Which algorithm is used by the OSPF ro…
Dijkstra's algorithm
The acronym for the link-state routing…
OSPFv3
22 terms
CCNA Chapter 7 Exam
the combination of a source IP address…
multiplexing
destination port number
fewer delays in transmission
What is a socket?
A host device needs to send a large video file across the net…
A host device sends a data packet to a web server via the HTT…
What is a beneficial feature of the UDP transport protocol?
the combination of a source IP address…
What is a socket?
multiplexing
A host device needs to send a large video file across the net…
48 terms
CCNA 3 Chapter 7
What is reliable transport protocol (R…
Which protocols use RTP?
What 5 kinds of packets does EIGRP use?
What is an EIGRP Hello packet?
RTP is used for reliable (requires ACK) and unreliable delive…
only EIGRP uses RTP to deliver packets to neighbors.
Hello... Update... Acknowledgement... Query... Reply
multicast packet sent every 5 seconds via unreliable delivery…
What is reliable transport protocol (R…
RTP is used for reliable (requires ACK) and unreliable delive…
Which protocols use RTP?
only EIGRP uses RTP to deliver packets to neighbors.
13 terms
CCNA Chapter 7 Terms
Transport layer
Application
Conversation
Ports
responsible for establishing a temporary communication sessio…
generates data that is sent from a program on a source host t…
each particular se of data flowing between a source applicati…
number assigned at the transport layer to identify the applic…
Transport layer
responsible for establishing a temporary communication sessio…
Application
generates data that is sent from a program on a source host t…
19 terms
CCNA Introduction to Networks Chapter 7
Fill in the blank.... During a TCP sessio…
Which transport layer feature is used…
Which scenario describes a function pr…
Compared to UDP, what factor causes ad…
SYN
TCP 3-way handshake
A student has two web browser windows open in order to access…
network traffic that is caused by retransmissions
Fill in the blank.... During a TCP sessio…
SYN
Which transport layer feature is used…
TCP 3-way handshake
39 terms
CCNA Chapter 7
Routers add IP routes to their routing…
Describe routing protocol?
Describe routed and routable protocol?
Describe Routing Protocol Functions
Connected Routes, Static Routes and routes learned by using r…
a set of messages, rules, and algorithms used by routers for…
Both terms refer to a protocol that defines a packet structur…
1-Learn routing information about IP subnets from neighboring…
Routers add IP routes to their routing…
Connected Routes, Static Routes and routes learned by using r…
Describe routing protocol?
a set of messages, rules, and algorithms used by routers for…
7 terms
CCNA Routing and Switching Essentials Chapter 7
Routing protocols
routing protocol
A. Data structures
C. Algorithm
__________ are used to facilitate the exchange of routing inf…
A __________ is a set of processes, algorithms, and messages…
Match following descriptions... Routing protocols typically use…
Match following descriptions... A(n) __________ is a finite list…
Routing protocols
__________ are used to facilitate the exchange of routing inf…
routing protocol
A __________ is a set of processes, algorithms, and messages…
22 terms
CCNA Routing and Switching Essentials Chapter 7
A. sends subnet mask information in ro…
C. R1, R3, R5, R7
C. contain an exit interface... E. contai…
B. uses Dijkstra's algorithm to build…
Which two statements are true regarding classless routing pro…
Refer to the exhibit. OSPF is used in the network. Which path…
Which two requirements are used to determine if a route can b…
Which two statements describe the OSPF routing protocol? (Cho…
A. sends subnet mask information in ro…
Which two statements are true regarding classless routing pro…
C. R1, R3, R5, R7
Refer to the exhibit. OSPF is used in the network. Which path…
10 terms
CCNA Voice: Chapter 7
local directory
H.450.3
H.450.2
hairpinning
The directory that is built automatically by the CME router a…
Industry-standard method of forwarding calls without hairpinn…
Industry-standard method of transferring calls without hairpi…
A problem that occurs when a call is transferred or forwarded…
local directory
The directory that is built automatically by the CME router a…
H.450.3
Industry-standard method of forwarding calls without hairpinn…
30 terms
CCNA1 Chapter 7
Data Link Layer
PDU
Network Segment
Peer
Layer 2 of the OSI model. Frames information and performs err…
The form data takes at each layer in the OSI model.
Part of a network where every device communicates using the s…
A host that has similar capabilities and responsibilities as…
Data Link Layer
Layer 2 of the OSI model. Frames information and performs err…
PDU
The form data takes at each layer in the OSI model.
22 terms
CCNA Routing and Switching Essentials Chapter 7
A. sends subnet mask information in ro…
C. R1, R3, R5, R7
C. contain an exit interface... E. contai…
B. uses Dijkstra's algorithm to build…
Which two statements are true regarding classless routing pro…
Refer to the exhibit. OSPF is used in the network. Which path…
Which two requirements are used to determine if a route can b…
Which two statements describe the OSPF routing protocol? (Cho…
A. sends subnet mask information in ro…
Which two statements are true regarding classless routing pro…
C. R1, R3, R5, R7
Refer to the exhibit. OSPF is used in the network. Which path…
27 terms
CCNA Chapter 7(commands)
show startup-config
copy running-config tftp
copy tftp running-config
ip dhcp excluded-address $Lower $upper
check configuration in RAM
copy configuration to TFTP server
restore configuration from TFTP server
configure dhcp excluded addresses
show startup-config
check configuration in RAM
copy running-config tftp
copy configuration to TFTP server
45 terms
Ccna chapter 7
EIGRP Hello Packets
Partial
Bounded
EIGRP Query and Reply Packets
Used to discover EIGPP neighbors
Only contains information about route changes.
Sent only to routers affected by the change.
Used when searching for networks.
EIGRP Hello Packets
Used to discover EIGPP neighbors
Partial
Only contains information about route changes.
42 terms
CCNA 2 Chapter 7 reduced
Which algorithm is used by the OSPF ro…
The acronym for the link-state routing…
What are the 4 main components of dyna…
When a router powers up, it does not e…
Dijkstra's algorithm
OSPFv3
1. data structures - routing tables... 2. messages (incoming & o…
1. the router applies configuration stored in NVRAM & discove…
Which algorithm is used by the OSPF ro…
Dijkstra's algorithm
The acronym for the link-state routing…
OSPFv3
26 terms
CCNA Chapter 7 Review
Peer-to-peer networks pass packets bet…
NetBEUI cannot scale into large intern…
IPX/SPX can be routed across the Inter…
Routers use metrics to determine which…
False
True
False
True
Peer-to-peer networks pass packets bet…
False
NetBEUI cannot scale into large intern…
True
50 terms
CCNA 2 Chapter 7
Which algorithm is used by the OSPF ro…
The acronym for the link-state routing…
What are the 4 main components of dyna…
What is the primary benefit of using d…
Dijkstra's algorithm
OSPFv3
1. data structures - routing tables... 2. messages (incoming & o…
routers exchange routing information when the topology change…
Which algorithm is used by the OSPF ro…
Dijkstra's algorithm
The acronym for the link-state routing…
OSPFv3
40 terms
ccna 3 chapter 7
Which protocol is used by EIGRP to sen…
What is indicated when an EIGRP route…
Which EIGRP route would have the prefe…
If all router Ethernet interfaces in a…
RTP
The route is viable and can be used to forward traffic.
a summary route
15 seconds
Which protocol is used by EIGRP to sen…
RTP
What is indicated when an EIGRP route…
The route is viable and can be used to forward traffic.
20 terms
CCNA Chapter 7
Connectionless
Unreliable Delivery
No Ordered Data Reconstruction
No Flow Control
UDP does not establish a connection between the hosts before…
UDP doesn't provide services to ensure that the data will be…
Data is received in a different order than it was sent
There are no mechanisms within UDP to control the amount of d…
Connectionless
UDP does not establish a connection between the hosts before…
Unreliable Delivery
UDP doesn't provide services to ensure that the data will be…
17 terms
chapter 7 ccna
Which protocol is used by EIGRP to sen…
When an EIGRP-enabled router uses a pa…
What is the purpose of using protocol-…
If all router Ethernet interfaces in a…
RTP
EIGRP authentication
to accommodate routing of different network layer protocols
15 seconds
Which protocol is used by EIGRP to sen…
RTP
When an EIGRP-enabled router uses a pa…
EIGRP authentication
22 terms
CCNA Routing and Switching Essentials Chapter 7
A. sends subnet mask information in ro…
C. R1, R3, R5, R7
C. contain an exit interface... E. contai…
B. uses Dijkstra's algorithm to build…
Which two statements are true regarding classless routing pro…
Refer to the exhibit. OSPF is used in the network. Which path…
Which two requirements are used to determine if a route can b…
Which two statements describe the OSPF routing protocol? (Cho…
A. sends subnet mask information in ro…
Which two statements are true regarding classless routing pro…
C. R1, R3, R5, R7
Refer to the exhibit. OSPF is used in the network. Which path…
48 terms
CCNA 3 Chapter 7
What is reliable transport protocol (R…
Which protocols use RTP?
What 5 kinds of packets does EIGRP use?
What is an EIGRP Hello packet?
RTP is used for reliable (requires ACK) and unreliable delive…
only EIGRP uses RTP to deliver packets to neighbors.
Hello... Update... Acknowledgement... Query... Reply
multicast packet sent every 5 seconds via unreliable delivery…
What is reliable transport protocol (R…
RTP is used for reliable (requires ACK) and unreliable delive…
Which protocols use RTP?
only EIGRP uses RTP to deliver packets to neighbors.
135 terms
CCNA LS CH7
binary
bit
octet
positional notation
a numbering system consisting of the digits 0 and 1, used by…
a single binary digit, represented by a 0 or a 1
one section of an IP address, consisting of a group of 8 bits
determining a digit value based on the digit position, used i…
binary
a numbering system consisting of the digits 0 and 1, used by…
bit
a single binary digit, represented by a 0 or a 1
14 terms
CCNA 4 CHAPTER 7
VPNs
Tunnel
Generic Routing Encapsulation... (GRE)
Cisco Adaptive Security Appliance (ASA)
create an end-to-end private network connection over third-pa…
eliminates the distance barrier and enables remote users to a…
a tunneling protocol developed by Cisco that can encapsulate…
a standalone firewall device that combines firewall, VPN conc…
VPNs
create an end-to-end private network connection over third-pa…
Tunnel
eliminates the distance barrier and enables remote users to a…
CISCO CCNA Chapter 7
Dual Stack
Tunneling
Translation
Bits in an IPv4 Address
Allows IPv4 and IPv6 to coexist on the same network. Devices…
Method of transporting an IPv6 packet over an IPv4 network... IP…
NAT64... Allows IPv6-enabled devices to communicate with IPv4-en…
32
Dual Stack
Allows IPv4 and IPv6 to coexist on the same network. Devices…
Tunneling
Method of transporting an IPv6 packet over an IPv4 network... IP…
10 terms
CCNA Voice (Chapter 7)
Local Directory
H.450.2 and H.450.3
hairpinning
Call Park
Corporate phone directory, used for caller ID, a directory th…
Call forwarding standard
When voice traffic reflects through an unnecessary router on…
Puts the caller on hold, and allows any phone in the organiza…
Local Directory
Corporate phone directory, used for caller ID, a directory th…
H.450.2 and H.450.3
Call forwarding standard
10 terms
CCNA 2: Chapter 7
Dynamic routing Protocols
Static Routing
Advantages of Dynamic Routing
Disadvantages of Dynamic Routing
finding or discovering remote networks and maintaining up to…
Routing to and from a stub network... smaller network that are n…
suitable for multiple routers and independent of network size
Depends on current topology, less secure and more complex
Dynamic routing Protocols
finding or discovering remote networks and maintaining up to…
Static Routing
Routing to and from a stub network... smaller network that are n…
46 terms
CCNA Chapter 7 Transportation Layer
Transport Layer
Application
Conversation
Ports
1. responsible for establishing a temporary communication ses…
generates data that is sent from a program on a source host t…
each particular set of data flowing between a source applicat…
number assigned at the transport layer to identify the applic…
Transport Layer
1. responsible for establishing a temporary communication ses…
Application
generates data that is sent from a program on a source host t…
8 terms
CCNA Chapter 7 - TCP Overhead
Sequence number (32 bits)
Acknowledgement number (32 bits)
Header length (4 bits)
Reserved (6 bits)
used for data reassembly purposes
indicates the data that has been received
known as "data offset"' indicates the length of the TCP segme…
field is reserved for the future
Sequence number (32 bits)
used for data reassembly purposes
Acknowledgement number (32 bits)
indicates the data that has been received
64 terms
CCNA 3 Exploration - Chapter 7
Which type of media do WLANs use?
802.11b
802.11a
802.11n
WLANs use radio frequencies (RF) instead of cables at the Phy…
Specifies data rates of 1, 2, 5.5 and 11 Mbps due to differen…
Uses the 5.7 GHz band with less interference, but obstruction…
Uses multiple radios and antennae at endpoints, each broadcas…
Which type of media do WLANs use?
WLANs use radio frequencies (RF) instead of cables at the Phy…
802.11b
Specifies data rates of 1, 2, 5.5 and 11 Mbps due to differen…
63 terms
CCNA 4 ch 7
what is a VPN and why is it used?
what is necessary to implement a VPN?
what are the Benefits of VPNs?
what are some more benifits of VPNs
VPNs are used to create an end-to-end private network connect…
To implement VPNs, a VPN gateway is necessary: Could be a rou…
Cost savings... - Enable organizations to use cost-effective,th…
Compatibility with broadband technology... • Allow mobile worke…
what is a VPN and why is it used?
VPNs are used to create an end-to-end private network connect…
what is necessary to implement a VPN?
To implement VPNs, a VPN gateway is necessary: Could be a rou…
64 terms
CCNA 3 Exploration - Chapter 7
Which type of media do WLANs use?
802.11b
802.11a
802.11n
WLANs use radio frequencies (RF) instead of cables at the Phy…
Specifies data rates of 1, 2, 5.5 and 11 Mbps due to differen…
Uses the 5.7 GHz band with less interference, but obstruction…
Uses multiple radios and antennae at endpoints, each broadcas…
Which type of media do WLANs use?
WLANs use radio frequencies (RF) instead of cables at the Phy…
802.11b
Specifies data rates of 1, 2, 5.5 and 11 Mbps due to differen…
55 terms
ccna 1 chapter 7
A PC is downloading a large file from…
A host device needs to send a large vi…
A technician wishes to use TFTP to tra…
192.168.1.2
10 segments
multiplexing
The file is segmented and then reassembled in the correct ord…
source IP address
A PC is downloading a large file from…
10 segments
A host device needs to send a large vi…
multiplexing
15 terms
CCNA Chapter 7 - UDP Features
Connectionless
Unreliable Delivery
No Ordered Data Reconstruction
No Flow Control
UDP does not establish a connection between the hosts before…
UDP does not provide services to ensure that the data will be…
occasionally data is received in a different order than it wa…
there are no mechanisms within UDP to control the amount of d…
Connectionless
UDP does not establish a connection between the hosts before…
Unreliable Delivery
UDP does not provide services to ensure that the data will be…
40 terms
ccna 3 chapter 7
Which protocol is used by EIGRP to sen…
What is indicated when an EIGRP route…
Which EIGRP route would have the prefe…
If all router Ethernet interfaces in a…
RTP
The route is viable and can be used to forward traffic.
a summary route
15 seconds
Which protocol is used by EIGRP to sen…
RTP
What is indicated when an EIGRP route…
The route is viable and can be used to forward traffic.
22 terms
Cisco CCNA 1 Chapter 7 2015
What is a socket?... A the combination…
A host device needs to send a large vi…
A host device sends a data packet to a…
What is a beneficial feature of the UD…
B the combination of a source IP address and port number or a…
multiplexing
destination port number
fewer delays in transmission
What is a socket?... A the combination…
B the combination of a source IP address and port number or a…
A host device needs to send a large vi…
multiplexing
21 terms
CCNA Discovery 1 Chapter 7
What are two authentication methods th…
What term describes the encoding of wi…
A technician has been asked to provide…
Why is security so important in wirele…
a. EAP... b. pre-shared keys
encryption
a. the size of the building... b. the number of solid interior w…
Wireless networks broadcast data over a medium that allows ea…
What are two authentication methods th…
a. EAP... b. pre-shared keys
What term describes the encoding of wi…
encryption
31 terms
CCNA3 Chapter 7 EIGRP
Place the options in the following ord…
What is the multicast address used by…
Refer to the exhibit. Which command sh…
An administrator issues the router eig…
first... - not scored -... third... second
FF02::A*
network 172.16.23.64 0.0.0.63*
as the autonomous system number*
Place the options in the following ord…
first... - not scored -... third... second
What is the multicast address used by…
FF02::A*
17 terms
CCNA 4 : Chapter 7 : Securing Site-to-Site Connectivity
Destination accessibility using a brow…
What is the purpose of Generic Routing…
GRE does or does not include strong se…
____ VPNs ensure information from a pr…
Site-to-Site
to manage the transportation of IP multicast and multiprotoco…
does not
IPsec
Destination accessibility using a brow…
Site-to-Site
What is the purpose of Generic Routing…
to manage the transportation of IP multicast and multiprotoco…
22 terms
CCNA Routing and Switching Essentials Chapter 7
A. sends subnet mask information in ro…
C. R1, R3, R5, R7
C. contain an exit interface... E. contai…
B. uses Dijkstra's algorithm to build…
Which two statements are true regarding classless routing pro…
Refer to the exhibit. OSPF is used in the network. Which path…
Which two requirements are used to determine if a route can b…
Which two statements describe the OSPF routing protocol? (Cho…
A. sends subnet mask information in ro…
Which two statements are true regarding classless routing pro…
C. R1, R3, R5, R7
Refer to the exhibit. OSPF is used in the network. Which path…
10 terms
CCNA Chapter 7 - TCP Process Fields
URG
ACK
PSH
RST
urgent pointer field significant
acknowledgement field significant
push function
reset the conection
URG
urgent pointer field significant
ACK
acknowledgement field significant
10 terms
chapter 7 ccent/ccna
RAM
ROM
NVRAM
Flash
Running IOS... Running configuration file... IP routing and ARP tab…
Bootup instruction... Basic diagnostic software... Limited IOS
Startup configuration file
IOS... Other system files
RAM
Running IOS... Running configuration file... IP routing and ARP tab…
ROM
Bootup instruction... Basic diagnostic software... Limited IOS
16 terms
CCNA semester 2 chapter 7
They send messages about network statu…
bgp
sends subnet mask information in routi…
The cumulative bandwidth that is used…
What is a disadvantage of using dynamic routing protocols?
Which dynamic routing protocol was developed as an exterior g…
Which two statements are true regarding classless routing pro…
An OSPF enabled router is processing learned routes to select…
They send messages about network statu…
What is a disadvantage of using dynamic routing protocols?
bgp
Which dynamic routing protocol was developed as an exterior g…
CCNA 1 Chapter 7 review
What provides for the segmentation of…
What is the port number range for priv…
The File Transfer Protocol (FTP) and t…
When a message is delivered using eith…
Transport Layer
49152 to 65535
TCP
Port Number
What provides for the segmentation of…
Transport Layer
What is the port number range for priv…
49152 to 65535
68 terms
CCNA 3 Chapter 7: Wireless LANs
Wireless LAN (WLAN)
Global Positioning System (GPS)
Radio Frequency (RF)
Access Point (AP)
A LAN with access points, together with the devices supportin…
A system of satellites and radio transmitters that allow a re…
A generic term referring to frequencies that correspond to ra…
A device that connects wireless clients (or stations) to form…
Wireless LAN (WLAN)
A LAN with access points, together with the devices supportin…
Global Positioning System (GPS)
A system of satellites and radio transmitters that allow a re…
12 terms
CCNA 1 Chapter 7 Protocols
HTTP
HTTPS
FTP
DHCP
Protocol: TCP Port Number:80... (Hyper Transfer Protocol) The c…
Protocol: TCP Port Number: 443... HTTPS is a secure version of…
Protocol: TCP Port Number: 20, 21... File Transfer Protocol
Protocol: UDP Port Number: 67, 68... (Dynamic Host Configuration…
HTTP
Protocol: TCP Port Number:80... (Hyper Transfer Protocol) The c…
HTTPS
Protocol: TCP Port Number: 443... HTTPS is a secure version of…
CCNA ICND1 - Chapter 7
Cisco Switches can be managed via what…
The Cisco Catalyst Switch has (__) ___…
The CLI can be accessed through these…
Terminal Settings for Console access:…
CLI (Command-Line Interface)... Web Interface... Network Management…
(48) RJ-45 UTP 10/100... 10/100/1000
The Console... Telnet... SSH
9600... No... 8... No... 1
Cisco Switches can be managed via what…
CLI (Command-Line Interface)... Web Interface... Network Management…
The Cisco Catalyst Switch has (__) ___…
(48) RJ-45 UTP 10/100... 10/100/1000
40 terms
CCNA ICND1 - Chapter 7
Cisco Switches can be managed via what…
The Cisco Catalyst Switch has (__) ___…
The CLI can be accessed through these…
Terminal Settings for Console access:…
CLI (Command-Line Interface)... Web Interface... Network Management…
(48) RJ-45 UTP 10/100... 10/100/1000
The Console... Telnet... SSH
9600... No... 8... No... 1
Cisco Switches can be managed via what…
CLI (Command-Line Interface)... Web Interface... Network Management…
The Cisco Catalyst Switch has (__) ___…
(48) RJ-45 UTP 10/100... 10/100/1000
7 terms
CCNA Introduction to Networking Chapter 7
What does TCP stand for?
What does UDP stand for?
The primary responsibilities of transp…
The transport layer uses ports to iden…
Transmission Control Protocol
User Datagram Protocol
Tracking the individual communication between applications on…
the application or service
What does TCP stand for?
Transmission Control Protocol
What does UDP stand for?
User Datagram Protocol
1 of 10