Study sets matching "dt"

Study sets
Classes
Users

Study sets matching "dt"

10 terms
DT
Ductility
Malleability
Hardness
Toughness
Tha ability to be drawn or stretched into smaller, thinner pi…
The ability to be deformed by compression without tearing or…
The ability to withstand abrasive wear and indentation
The ability to withstand sudden and shock loading without fra…
Ductility
Tha ability to be drawn or stretched into smaller, thinner pi…
Malleability
The ability to be deformed by compression without tearing or…
Dt
Reuse
Reduce
Rethink
Recycle
Use something again or more than once.
Is it possible to reduce the amount of materials used.
Is there a better way that would harm the environment less
Make sure the products are converted back to their simplest f…
Reuse
Use something again or more than once.
Reduce
Is it possible to reduce the amount of materials used.
10 terms
DT
Deciduous wood
Tri square
Tenon saw
Coniferous wood
hard woods
-Marking lines at 90° from the edge of the materia
used for cutting straight lines in wood
soft woods
Deciduous wood
hard woods
Tri square
-Marking lines at 90° from the edge of the materia
20 terms
DT
Integrated Circuit
Capacitor
LED (Light Emitting Diode)
Electronic Resistor
An electronic component used to control another circuit or co…
Used to store electrical energy. Used to block direct current.
Gives out a light when electricity is passed through it.
An electronic component used to resist specified values of cu…
Integrated Circuit
An electronic component used to control another circuit or co…
Capacitor
Used to store electrical energy. Used to block direct current.
Dt
Glass
Plastic
Raster cut
Thermocrati plastic
Comes from nature, 100% recyclable and containers can be reus…
Take a long time to decompose, can me melted into different p…
For engraving
Change colour as the temperature changes e.g rubber duck and…
Glass
Comes from nature, 100% recyclable and containers can be reus…
Plastic
Take a long time to decompose, can me melted into different p…
15 terms
DT
Scriber
Flat file Half rounded file and round…
Needle file
Wet and dry paper
It will make out the word on the aluminium so the design does…
It is like sandpaper and can cut the aluminium
The needle file are used for filing small places
It is the same as sandpaper but is stronger
Scriber
It will make out the word on the aluminium so the design does…
Flat file Half rounded file and round…
It is like sandpaper and can cut the aluminium
50 terms
DT
Meets european standards
European eco label
British standards institute
Forest stewardship council. Comes from…
What does this symbol mean the product does?
What is this?
What does this mean?
What does this mean
Meets european standards
What does this symbol mean the product does?
European eco label
What is this?
36 terms
DT
Ferrous Metals
Non-Ferrous Metals
Alloys
Elasticity
Contain iron. Prone to rusting and are magnetic
Do not contain iron. Not magnetic. Do not rust but prone to c…
Contains two or more metals to improve the properties
The ability to regain the object's original shape after it ha…
Ferrous Metals
Contain iron. Prone to rusting and are magnetic
Non-Ferrous Metals
Do not contain iron. Not magnetic. Do not rust but prone to c…
94 terms
DT
Timber
Hardwoods
Softwoods
Manufactured board
Wood material
Deciduous trees, generally slow growing, normally hard, sold…
Coniferous, grow faster, softer and sold in sizes such as 50m…
Think chipboard, MDF and plywood and are sold in feet and inc…
Timber
Wood material
Hardwoods
Deciduous trees, generally slow growing, normally hard, sold…
DT
Steel Ruler
Try Square
Marking Gauge
Scriber
Measuring more accurately than plastic ruler
Marking straight and perpendicular lines on wood
Marking line parallel to a straight edge.
Marking lines on steel
Steel Ruler
Measuring more accurately than plastic ruler
Try Square
Marking straight and perpendicular lines on wood
DT
Self Defense
Law Enforcement C/DT
Every force application should be:
Where were the techniques adopted from?
-does not account for the safety of the suspect... -civilians do…
-takes the safety/well being of the suspect into account... -des…
-effective... -efficient... -ethical
-silat... -kali... -aikido... -boxing... -karate... -jiu jitsu... -judo... -muay t…
Self Defense
-does not account for the safety of the suspect... -civilians do…
Law Enforcement C/DT
-takes the safety/well being of the suspect into account... -des…
91 terms
DT
In a multiple lane roundabout, you sho…
If the head restraint is adjusted prop…
When a vehicle is equipped with airbag…
hand over hand steering involves pushi…
before
True
rear seat
crosses
In a multiple lane roundabout, you sho…
before
If the head restraint is adjusted prop…
True
dt
coping saw
try square
file
steel ruler
Used for cutting curved shapes in wood or plastic.
Used for marking out straight lines on wood.
Used to smooth rough or sharp edges from metal or wood.
Used for measuring and marking out work.
coping saw
Used for cutting curved shapes in wood or plastic.
try square
Used for marking out straight lines on wood.
DT
Passive Resistance
Actively Resisting
Force
Soft Hand Control
When a subject does not cooperate with an officer's commands,…
When a subject makes physically evasive movements to interfer…
Any physical strike or instrumental contact with a person; an…
Techniques that are not impact oriented and include pain comp…
Passive Resistance
When a subject does not cooperate with an officer's commands,…
Actively Resisting
When a subject makes physically evasive movements to interfer…
17 terms
Dt
Ferrous
Non-ferrous
Alloy
Ductility
Mainly iron based materials with small quantities of other me…
Do not contain iron. They do not rust and are not magnetic ho…
Are substances that have two ore more metals and sometimes ot…
The ability to be stretched without breaking
Ferrous
Mainly iron based materials with small quantities of other me…
Non-ferrous
Do not contain iron. They do not rust and are not magnetic ho…
DT
Virtual prototyping
Bottom-up modelling
Top-down modelling
Digital humans
software-driven modelling process that simulates products and…
create parts then join them together to form an assembly. The…
Locking-in information that is critical to a design at the ea…
Are computer simulations of a variety of mechanical and biolo…
Virtual prototyping
software-driven modelling process that simulates products and…
Bottom-up modelling
create parts then join them together to form an assembly. The…
DT
Deciduous Wood
Tri Square
Tenon Saw
Coniferous Wood
A type of tree that does not grow during winter. Produces har…
A tool used to draw squares.
A saw that can be used to chop off large pieces of material
A type of tree that grows every season. Produces Softwood
Deciduous Wood
A type of tree that does not grow during winter. Produces har…
Tri Square
A tool used to draw squares.
186 terms
DT
PPE
why use PPE?
How is each piece of equipment designed?
Definition of COSHH
Personal Protective Equipment
Reduces the risk of damage to your sight, hearing, breathing…
Designed to prevent certain hazards damaging you to reduce th…
Control of substances hazardous to health
PPE
Personal Protective Equipment
why use PPE?
Reduces the risk of damage to your sight, hearing, breathing…
What does FSC stand for?
Who are they?
About FSC
What does the logo indicate?
FSC stands for Forest Stewardship Council
FSC is a global, not-for-profit organisation dedicated to the…
The Forest Stewardship Council (FSC) is an international, non…
FSC's "tick tree" logo is used to indicate that products are…
What does FSC stand for?
FSC stands for Forest Stewardship Council
Who are they?
FSC is a global, not-for-profit organisation dedicated to the…
5 terms
dt
hammer
saw
what is ordomita
if I was making a table what material…
what is this
what is this called
its is the work of disks and movement
pine wood or oak wood
hammer
what is this
saw
what is this called
Vacum forming
Extrusion
Wood turning
Wood laminating
The mould is placed on the table then lowered. ... A thermoplast…
Plastic pellets from hopper are fed onto acre which forces th…
Centre of wood is marked... cut centre mark then place in drive…
Layer of wood are coast in glue then placed in mould then pla…
Vacum forming
The mould is placed on the table then lowered. ... A thermoplast…
Extrusion
Plastic pellets from hopper are fed onto acre which forces th…
Dt
Acrylic
Abs
HIPS
PP
Which plastic is very brittle
Which plastic was really flexible?
Which plastic was very malleable
Which plastic cut very well?
Acrylic
Which plastic is very brittle
Abs
Which plastic was really flexible?
DT
Alessi 1
Alessi 2
Memphis 1
Memphis 2
Fun
Cartoon-like
Vibrant
Colourful
Alessi 1
Fun
Alessi 2
Cartoon-like
dt
coniferous
deciduous
hack saw
coping saw
evergreen trees
trees that loose their leaves seasonally
cuts wood and plastic
cuts metal
coniferous
evergreen trees
deciduous
trees that loose their leaves seasonally
29 terms
DT
injection moulding advantages
injection moulding disadvantages
blow moulding advantages
blow moulding disadvantages
-very complex 3D shapes can be produced... -high volumes can be…
-initial set-up costs are high ... -moulds are expensive
-non-circular shapes can be produced ... -once set up, blow moul…
-moulds can be expensive ... -it's difficult to produce re-entra…
injection moulding advantages
-very complex 3D shapes can be produced... -high volumes can be…
injection moulding disadvantages
-initial set-up costs are high ... -moulds are expensive
26 terms
DT
Tenon saw
Coping saw
Vice
Pillar drill
Cut straight lines in wood
Cut curves in wood
Hold work in position
Drill holes
Tenon saw
Cut straight lines in wood
Coping saw
Cut curves in wood
16 terms
DT
smart materials
New materials
pre manufactured materials
Art nouveau
They have properties that react to changes in their environme…
Any material post the 1950's such as Carbon fibre
Also known as standard component is a pre-made part that is u…
Art nouveau(1880 to 1910) could be said to be the first 20th…
smart materials
They have properties that react to changes in their environme…
New materials
Any material post the 1950's such as Carbon fibre
17 terms
DT
Exclusive
Inclusive
Anthropometrics
5th to the 95th percentile
excluding people by failing to meet their needs
meeting everyone's needs
the study of human measurements
the 'normal' range that product designer's target
Exclusive
excluding people by failing to meet their needs
Inclusive
meeting everyone's needs
12 terms
DT
Abs plastic
Steel rule
Junior hacksaw
Vice
Used to make body of pen
Used to measure the length of each tube
Used to cut the tubes
Used to hold the tubes for cutting and filing
Abs plastic
Used to make body of pen
Steel rule
Used to measure the length of each tube
car
phono
car
phono
In one study from the Green Davis Inst…
Even though everyone loves Beyonce, sh…
Teenage girls in the media are viewed…
Reality shows such as "Keeping up with…
a woman by the name Alice Harold was being interviewed by a g…
...
...
...
In one study from the Green Davis Inst…
a woman by the name Alice Harold was being interviewed by a g…
Even though everyone loves Beyonce, sh…
...
DT
Hard wood
Soft wood
Manufactured board
Ferrous
Exspensive wood that is very strong
Cheep wood that is not very strong
A mixture of different types of wood glued together to make o…
Metals that contain iron and are magnetic
Hard wood
Exspensive wood that is very strong
Soft wood
Cheep wood that is not very strong
DT
Brand Identity
British Standards Institute Kite Mark…
Smart Material
Quality Assurance
How that business wants to be perceived by consumers. The com…
Refer to product safety and quality.
React to changes in their environment e.g. Thermochronic, Pho…
Overall approach to ensure products attain a consistently hig…
Brand Identity
How that business wants to be perceived by consumers. The com…
British Standards Institute Kite Mark…
Refer to product safety and quality.
17 terms
Dt
La Audición
La Boda
La Cita
El Concurso
Audition
Wedding
Date
Contest
La Audición
Audition
La Boda
Wedding
Dt
Anthropometrics
Ergonomics
Jigs
Templates
The study of human measurements
The study of making products comfortable and easy to use
Used for guiding tools. Made for a variety of simple jobs, of…
To make copies of identical shapes derived from an original
Anthropometrics
The study of human measurements
Ergonomics
The study of making products comfortable and easy to use
donald trump
bernie sanders
hilary clinton
john kasich
donald trump
bernie sanders
Placement
Overlapping
Density
Forshortening
the illusion of images near and far away by placement on the…
The illusion of objects in space that shows depth by placing…
Helps with the illusion of distance by drawing things fainter…
The illusion of an object bowling/coming towards you or away…
Placement
the illusion of images near and far away by placement on the…
Overlapping
The illusion of objects in space that shows depth by placing…
Fire
hand
baby bottle
skull
Flamable
corrosive
reactive
toxic/ posion
Fire
Flamable
hand
corrosive
Bousterious
Bombastic
Boon
Credibility
Loud/full of energy
Excessively confident/pompous
Type of blessing
Believability
Bousterious
Loud/full of energy
Bombastic
Excessively confident/pompous
Cross Cut Saw
Ball Peen Hammer
Open End... adjustable Wrench
T- Square
Cross Cut Saw
Ball Peen Hammer
13 terms
Dt
On average how many drinks will alcoho…
The largest single category of error f…
Brain power associated with driving __…
There are three degrees of aggressive…
1
Improper visual
Increases by 40%
Rush in. Total aggression. Violence.
On average how many drinks will alcoho…
1
The largest single category of error f…
Improper visual
28 terms
DT
mild steel
stainless steel
carbon steel
ductility
This is a type of metal that is strong and will rust unless p…
A mixture of a metal and other metals or non metals
Alloy of iron containing controlled small amounts of carbon.
the ability of a substance to be drawn, pulled, or extruded t…
mild steel
This is a type of metal that is strong and will rust unless p…
stainless steel
A mixture of a metal and other metals or non metals
7 terms
DT
Durability
Practicality
Recycling
Utility
quality of lasting longer without the performance decreasing.
something that works in theory and in use.
Reusing materials for another use.
The use or state of usefulness.
Durability
quality of lasting longer without the performance decreasing.
Practicality
something that works in theory and in use.
5 terms
DT
Compression
Tension
Torsion
Bending
A squashing force
A pulling or stretching force
A twisting force
A sagging or buckling force.
Compression
A squashing force
Tension
A pulling or stretching force
8 terms
DT
CAD
CAM
CNC
Design Brief
Computer Aided Design
Computer Aided Manufacturing
Computer Numerical Control
Briefing what you are going to do in the product
CAD
Computer Aided Design
CAM
Computer Aided Manufacturing
7 terms
DT
Manufactured wood
Hard wood
Soft wood
Hard wood
Ply wood is a
Beech is a
Pine is a
Oak is a
Manufactured wood
Ply wood is a
Hard wood
Beech is a
14 terms
Dt
Dense
Depleted
Eclipse
eerie
Tightly packed in
To use up
To overshadow or surpass
Weird scary or creepy
Dense
Tightly packed in
Depleted
To use up
coulomb
ion
ionization
protective devices
unit for charge
an atom that is negatively or positively charged
process which atoms either gain or loose electrons
used to protect a circuit from overloading
coulomb
unit for charge
ion
an atom that is negatively or positively charged
Defensive tactics
Cardiovascular training
Objective reasonableness
Compliance
Is a system of controlled defensive body movements used by cr…
Is any exercise that elevates the heart rate to a range betwe…
To describe the process for evaluating the appropriateness of…
The verbal and/or physical yielding to an officer's authority…
Defensive tactics
Is a system of controlled defensive body movements used by cr…
Cardiovascular training
Is any exercise that elevates the heart rate to a range betwe…
21 terms
DT
autoclave
biological monitor
critical items
disinfection
an instrument that creates high temperature and high pressure…
an organism that provides quantitative information on the qua…
Have the greatest potential for transmitting infection, Items…
destruction of pathogens by chemical or physical means
autoclave
an instrument that creates high temperature and high pressure…
biological monitor
an organism that provides quantitative information on the qua…
1 of 10